blue screen error pa help po - PINOYDEN

pa help nmn po sa neo laptop ko kc nag blue screen ayaw nmn gumana sa safe mode. acpi error po at my nklgay update bios,, panu po ba mabalik sa dati na hndi na kylngan pang ireformat uli?

meron bang dvd/cd player ang laptop mo tol? kung meron, gamitin mu yun Ultimate Boot CD..

otoi magpalit ka ng ram,kadalasan yan ang sira pagkablue screen subok ko na yan.

Sa ram mo nga yan otoy try mo.

Open or reboot your laptop. Sa boot options po, instead of going to safe mode, choose Last Known Good Configuration. Kung hindi po lumalabas ang option na yan, reboot and press F8 simultaneously hanggang sa lumabas ang boot options.

Pag ganun pa rin po, choose mo po yun Disable Automatic Restart on System Failure para po lumabas ang error code sa BSOD.

Tingin ko wala sa ram mo ang dperensya.

hindi po lahat ng BSOD ay sa RAM ang problem, otor try mo po ito, Enter the bios by pressing the delete or F2 kung ano po yung key nyo for BIOS
Go to the power management page and make sure that "ACPI aware OS" or maybe "P&P OS" is set to yes.
Set power management to disabled. Exit, saving changes and see how you go. A bios upgrade may cure it, pero in view of the dangers involved, hindi ko po siya recommended. pero itry nyo narin po

ganyan din nangyari sa pc ko, nilinis ko lang yung loob ng pc ko.. ok na

laptop po sir yun kay ts hindi desktop.. hehe

ok, i'm having the same problem mga 'te at kuya.

start
acer splash screen
f8 menu shows
start win normally
enter
screensaver loading . . .
blue screen for a second
dim, restart.

// i tried other options pero same results, nagrerestart lng . .

pwd ko p po b mabackup yung mga files ko?
can it be fixed, how?

brb, thanks . .

subukan mo po sa safemode saka mo ibuck up...dapat gumawa ka sarili mo thread..

@103827
ayaw nga rin po sa safe mode and other options . .

i'm new to this.
and i have no idea on what to do.
or should i consult an it professional?

kung hindi ka bihasa, despite na madami advises sayo not working pa din. Better to consult your IT professional

yup sir tama po si cute_huckin baka po mas lumala sir

ok, salamat sa infos.

i just want to know 4 things:
1. cause
2. effect
3. solution
4. cost

sana may mag-post fyi lng para sa lhat, if ever ma-encounter nila 'to di sila magpapanic . .

eto po ang kadalasahan Cause ng BSOD...BLUE SCREEN OF DEATH..

1. software or sa device me problem
2. hardware device malfunctioning o tinanggal mo ang hardware habang and windows ay tumatakbo]
3. hard disk errors/ Ram error kadalasan po silang 2 ang pinaka madalas
4. corrupted files or windows startup
5. minsan overheating or masyado ng madumi pc mo


eto naman mga code ng BSOD at eto din mga remedyo

Stop Code: STOP 0x0000000A

IRQL_NOT_LESS_EQUAL

Code Meaning : Faulty device drivers, or services from backup

utilities or virus scanners

Recommended Resolution: Remove, disable or stop the offending

drivers, backup utilities or anti-virus programs. Get updated

software from the manufacturer.



Stop Code: STOP 0x0000001E

KMODE_EXCEPTION_NOT_HANDLED

Code Meaning: Some driver files may be causing a problem.

Recommended Resolution: Remove, disable or update the driverfile

listed in the error message. Verify if new hardware installation

is correct.



Stop Code: STOP 0x00000024

NTFS_FILE_SYSTEM

Code Meaning: Usually caused by disk corruption in the NTFS file

system or third-party disk defragmenters.

Recommended Resolution: Use hard disk diagnostic software to

verify that the hard disk is working. Remember to always Use

Microsoft-certified disk defragmenters.



Stop Code: STOP 0x0000002E

DATA_BUS_ERROR

Code Meaning: Caused by a parity error in the system memory.

Almost always caused by hardware problemsa configuration

issue, defective hardware, or incompatible hardware.

Recommended Resolution: If physical RAM was recently added to

the system, remove it and see if the error still occurs. If the error

persists, try disabling memory caching in the BIOS. Else remove,

repair or reinstall the defective hardware.



Stop Code: STOP 0x00000050

PAGE_FAULT_IN_NONPAGED_AREA

Code Meaning : Caused when requested data is not found in memory;

the system checks the page file, but the missing data is

I dentified as unable to be written to the page file

Recommended Resolution: Remove any newly-added hardware or

run diagnostic software supplied by the manufacturer to check if

the component has failed. Install updated device drivers or roll

back to a previous driver.



Stop Code: STOP 0x0000007B

INACCESSIBLE_BOOT_DEVICE

Code Meaning: Caused when Windows loses access to the system

partition during the Startup process. This can be caused by: an

incorrect driver for a SCSI, RAID, or UDMA IDE controller;

incorrect ARC path in the Boot.ini; or a failed boot device.

Recommended Resolution: Verify that the disk storage device is

installed correctly and working. Reinstall or update the device

driver. Verify that the BIOS setting for the device is correct.

Verify the integrity of the hard disk.



Stop Code: STOP 0x0000007F

UNEXPECTED_KERNEL_MODE_TRAP

Code Meaning: Caused when the CPU generates an error that the

kernel does not catch. Usually hardware relatedespecially RAM.

Can also be caused by CPU overclocking, or defective components

on the motherboard.

Recommended Resolution:

1 . Run the memory diagnostic to test RAM.

2. Restore over clocked settings to previous values.

3. Repair/replace the motherboard.

4. Disable sync negotiation in SCSI BIOS; check SCSI termination.



Stop Code: STOP 0x000000D1

DRIVER_IRQL_NOT_LESS_OR_EQUAL

Code Meaning: Occurs when the system attempts to access

pageable memory at a process IRQL that is too high

Recommended Resolution: Very similar to STOP 0xA. Remove,

disable or stop the offending drivers, backup utilities or anti-virus

programs. Get updated software from the manufacturer.



Stop Code: STOP 0xC000021A

STATUS_SYSTEM_PROCESS_TERMINATED

Code Meaning: Caused when the user-mode subsystem (Win logon

or CSRSS) is fatally compromised and security cannot be

guaranteed. The most common causes are third-party applications or

mismatched system files.

Recommended Resolution:

1. Remove, disable, or roll back any newly-installed device driver.

2. Uninstall any newly-installed software.

3. Use Windows-compatible backup/restore programs.

4. Restore full control permissions to the local SECURITY account

on the system root folder by doing a fresh parallel installation of

Windows on a separate partition.